Zenair / Zenith Zenith CH 640 for Sale

Loading…
Loading…
Loading…

What a Zenith CH 640 costs, how far it flies, and what it costs to keep

PlaneFox tracks 2 Zenith CH 640 aircraft for sale and re-reads every one of them from the broker and dealer sites it watches, so the figures below move when the market moves. Every number on this page is measured from those live listings, not taken from a published price guide.

How far can a Zenair / Zenith Zenith CH 640 fly?

A Zenair / Zenith Zenith CH 640 flies about 440 nm, roughly 815 km, which is about 3 h 23 min in still air at typical cruise.

What does a Zenair / Zenith Zenith CH 640 cost to own?

A Zenair / Zenith Zenith CH 640 costs about EUR 1,830 a month to run, or about EUR 192 for every flight hour when it is flown 150 hours a year.

More questions about the Zenith CH 640

How much does a Zenith CH 640 cost?
Used Zenith CH 640 prices vary depending on year of manufacture, airframe hours, avionics and overall condition. Browse the current Zenith CH 640 listings on PlaneFox to see real-time asking prices from European brokers and private sellers.
What is the price range for a used Zenith CH 640?
Zenith CH 640 prices depend heavily on year, airframe hours, engine time since overhaul and equipment level. Check the live Zenith CH 640 listings on PlaneFox to see the current asking-price range from brokers and private sellers.
How many Zenith CH 640 aircraft are for sale right now?
PlaneFox lists 2 Zenith CH 640 aircraft for sale right now, gathered from the broker and dealer sites it watches. The count moves through the week as those sources are re-read. Because PlaneFox reads the same listings repeatedly over time, it also shows which have cut their asking price and which have sold.
Where can I find a Zenith CH 640 for sale?
Every Zenith CH 640 PlaneFox can see is on this page — 2 of them, gathered from the broker and dealer sites it re-reads continuously. Most are listed in Spain (2). Each listing links straight through to the seller, so a Zenith CH 640 in another country is worth considering rather than filtering out.
What should I check when buying a used Zenith CH 640?
On a used Zenith CH 640, check airframe hours, engine time since overhaul, avionics generation and damage history before anything else. PlaneFox recommends a pre-purchase inspection by an EASA Part-145 shop that knows the type, which typically costs EUR 1,500 to EUR 3,500. Under 1,500 airframe hours is low-time and above 3,500 means budgeting for higher maintenance; most piston engines run a 2,000-hour TBO, so past 1,500 to 1,700 hours since overhaul expect the overhaul within one to three years at EUR 25,000 to EUR 45,000. Read the full logbook history for prop strikes, gear-up landings and structural repair, and confirm ADs and SBs are complied with.

About the Zenair / Zenith Zenith CH 640

Aircraft overview

The Zenair / Zenith Zenith CH 640 is a four seat, all metal, low wing aircraft developed by Chris Heintz and offered through Zenair and Zenith Aircraft as an amateur built kit. The design appeared in the early 2000s and was aimed at pilots wanting a simple, conventional personal aircraft with more cabin capacity than the two seat Zenith models. It uses tricycle landing gear, a riveted aluminum structure and a straightforward systems layout, making it relevant in the used market for buyers who want experimental category flexibility without moving into composite or high performance retractable types.

Performance & specifications

Typical CH 640 performance depends heavily on the engine, propeller, build quality and installed equipment. Most examples use Lycoming O-320 or O-360 series power, commonly in the 150 to 180 hp range. Published figures for the design commonly place cruise speed around 120 knots, with a range of roughly 500 nautical miles when equipped with standard fuel and operated at normal cruise settings. Gross weight is commonly listed at 2,200 lb, with useful load often near 1,000 lb, although each aircraft must be checked against its actual weight and balance records. Published service ceiling figures are commonly around 14,000 feet.

Cabin & avionics

The cabin has four seats in a side by side, two row arrangement, with the practical payload depending on fuel load, engine choice and completed empty weight. Access, visibility and interior finish vary by builder, so individual inspection matters more than model year. There is no single factory avionics standard for the Zenair / Zenith Zenith CH 640. Used aircraft may have traditional analog instruments, VFR GPS and basic radios, or modern experimental glass panels such as Garmin G3X, Dynon SkyView, Advanced Flight Systems or MGL equipment. IFR capability should be verified by installed equipment, pitot static and transponder records, operating limitations and the aircraft logbooks.

Buying & value

For buyers comparing used aircraft, the Zenair / Zenith Zenith CH 640 sits in the experimental four seat segment, often priced below certified four seat trainers and travelers of similar size. Key review points include builder workmanship, corrosion protection, control system rigging, fuel system layout, engine installation, cooling performance and completeness of documentation. Confirm the operating limitations, airworthiness certificate, condition inspection history, weight and balance data, and any service information or factory updates applicable to the airframe. Common upgrades include newer EFIS panels, ADS-B equipment, autopilots, interior refinishing and engine or propeller changes. Market value is driven less by calendar age and more by build quality, total time, engine time, avionics, documentation and demonstrated operating history.

2 Zenith CH 640 aircraft are for sale on PlaneFox today.

See all 2 listings