PlaneFox tracks 1 CubCrafters Top Cub aircraft for sale and re-reads every one of them from the broker and dealer sites it watches, so the figures below move when the market moves. Every number on this page is measured from those live listings, not taken from a published price guide.
A CubCrafters Top Cub flies about 495 nm, roughly 917 km, which is about 4 h 30 min in still air at typical cruise.
A CubCrafters Top Cub costs about EUR 1,986 a month to run, or about EUR 207 for every flight hour when it is flown 150 hours a year.
The CubCrafters Top Cub, formally the CC18-180, is a factory-built, FAA certified utility aircraft developed by CubCrafters in Yakima, Washington. It first flew in the early 2000s and received FAA type certification in 2004, with production continuing until the model was succeeded in the lineup by later CubCrafters certified designs. The Top Cub is a two-seat, high-wing tailwheel aircraft in the classic Super Cub category, intended for personal flying, backcountry operations, observation, training and utility work. Its significance for buyers is that it combines the familiar Piper PA-18 style mission with modern manufacturing, a new-production airframe and a 180 hp engine under a standard category type certificate.
Power is typically provided by a Lycoming O-360 series four-cylinder engine rated at 180 hp, driving a fixed-pitch or constant-speed propeller depending on configuration and approval. Published performance varies with tires, propeller, weight and equipment, but the Top Cub is commonly associated with cruise speeds around 105 to 110 knots in standard configuration. Range is generally quoted in the low 400 nautical mile class. The aircraft has a maximum gross weight of 2,300 lb and a useful load commonly around 1,000 lb, depending on equipment. Published service ceiling is about 14,000 feet. Short takeoff and landing capability is central to the design, especially when fitted with appropriate tires, propeller and flap technique.
The cabin is a tandem two-seat layout with front and rear controls, large side windows and the upright seating position expected in a utility taildragger. Access, visibility and baggage practicality are important strengths compared with many older restored Cubs, although useful load and baggage limits still need to be checked aircraft by aircraft. Avionics are usually straightforward rather than integrated glass cockpit systems. Typical used examples may have conventional flight instruments, VHF com, transponder, GPS such as Garmin GNS or GTN units, engine monitoring and ADS-B upgrades. Garmin Perspective and G1000 suites are not typical Top Cub equipment.
Used Top Cub aircraft usually appeal to buyers who want a certified backcountry aircraft rather than an experimental or light sport Cub variant. Key inspection areas include airframe history, landing gear and tailwheel wear, fabric condition, corrosion protection, propeller damage history, engine time, logbook continuity and compliance with service bulletins or airworthiness directives. Common equipment differences include wheel and tire size, skis or floats approval, baggage options, vortex generators, propeller type, shoulder harnesses and avionics modernization. In the used market, the Top Cub generally sits above older Piper PA-18 projects and many amateur-built alternatives, while offering a more traditional certified utility profile than later CubCrafters models with newer airframes and avionics.